Room 8, Floor 25, Block A
No.1 Jianshezhong Road
Tiexi District, Shenyang, Liaoning, China
Tel
8624-25757560
8624-85611585
Working Time
Monday ~ Friday：8:30~17:00
Saturday：8:30~12:00
T5012A
You Are Here：Home > > Products Categories > Lubricant Additive Package > Hydraulic Oil Additive Package
T5012A
Commodity category：Antiwear Hydraulic Oil Additive Package
Number of views：
I. Key Product Benefits
It’s made by sulphur phosphorous zinc salt of dioctyl antioxidant anticorrosion agent,anti-rust agent,ash-free antioxidan,metal attenuated agent and Hualun its own research and development of benzene triazole fatty amine salt multifunctional additives.
Strong protection against wear.rust and oxidation.
Fast air release.
Good demulsibility and anti-foam property.
Broad viscosity grade coverage.
Fully compatible with Group I II III base stocks.
II. Application
Antiwear hydraulic oil additive package.
Hydraulic systems used in industrial and marine applications as well as in automotive machinery.
III. Recommended Treat Rate
| Viscosity Grade | Treat Rate,%m/m |
| 15,22,32, | 0.65 |
| 46,68,100,150 | 0.65 |
IV. Typical Characteristics
| Item | Quality Index | Test Method | |
| Appearance | Clear Light Yellow Fluid | Visual Observation | |
| Density20℃ | g/cm3 | Report | GB/T2540 |
| Kinematic Viscosity | 40℃ mm2/s | Report | GB/T265 |
| Flash Point(COC) | ℃ | ≥150℃ | GB/T3536 |
| Sulfur Content | %m/m | ≥10.0 | SH/T0303 |
| Phosphorus Content | %m/m | ≥5.0 | SH/0296 |
| Zinc Content | %m/m | ≥6.0 | SH/T0226 |
| Nitrogen Content | %m/m | ≥0.25 | SH/T0224 |
V. Storage,Package and Transportation
Inhibit impurity pollution and water.
Filter before injecting into the device to prevent oil passages clogging.
Do not mix with other oil.Clean the fuel tank and rail thoroughly before changing oil.
The temperature should not exceed 75℃In the long term storage, the temperature should not exceed 45 ℃.
Packaged by galvanized drums(N.W200kg/Drum).
